You Yee 2 x1

If you want a powerful SBC with more features than a regular Raspberry Pi, you can check this out. UY2 X1 that we present to you It’s certainly not like the Raspberry Pi, which has a huge number of devices and a good community behind it. In addition to using ARM, in this case it is a dedicated x86-based SBC on the 11th generation Intel Celeron N5105 ( Jasper Lake) with four cores and a clock frequency of 2.9 Ghz.

On the other hand, it also supports various operating systems, such as Ubuntu which works quite well and even for Windows as well, so you have a good chance here. There is also UEFI AMI BIOS Aptio. Just like a normal PC You can create a dual-boot with two or more operating systems in a simple way. Just like you would on a regular PC. And unlike other SBCs, it uses an SD card to load the operating system.

index

Youyeetoo X1 Technical Specifications

If you want to know Technical specifications With this new SBC, I will show you everything that Youyeetoo X1 board can offer you:

  • Intel Celeeron N5105 quad-core Jasper Lake at 2 Ghz (2.9 Ghz in Turbo mode) + Intel UHD iGPU at 800 Mhz – Total TDP 10W
  • System memory RAM 8 or 16 GB type LPDDR4
  • Storage space:
    • Some boards may allow eMMC flash with a capacity of 64, 128, or 256 GB.
    • There’s also a rear M-2 Key-M slot for installing an NVMe 2280 SSD.
    • There is a SATA III port for installing HDD or SSD with this type of interface.
  • Video output
    • HDMI 2.0 supports up to 4K @ 60 FPS
    • Micro HDMI 2.0 up to 4K @ 60 FPS
    • MIPI DSI FPC with MIPI7LCD touch support and 1024 × 600 px resolution LCD type
  • sound
    • 3.5 mm headphone jack
    • Built-in digital microphone with noise reduction function.
    • 8 ohm speakers, 3W amplifier, mounted on the board.
    • HDMI audio output
    • 2 pins for additional 3.3v analog microphone
  • Connection:
    • RJ45 port for Gigabit Ethernet LAN
    • WiFi 5 + Bluetooth 5.0 or WiFi 6 + Bluetooth 5.2 (optional) using module for M.2 E-key 2230
    • 4G LTE on the M.2 Key-E 2230 expansion module (you’ll need a SIM card with this data rate to use it)
    • NFC
  • port:
    • 2x USB 3.0 Type A
    • 2x USB 2.0 Type A
    • 2x USB 2.0 via pin header
    • 3x UART TTL with connectors for RS232, RS485 or CAN Bus
    • I2C 4 pin
    • SPI 5 pin
    • 6 pins with 5x GPIO (I/O at 3.3v)
  • Other special features:
    • 2x blue and red LEDs on board + 4 pins for extra LEDs
    • On/Off button
    • reset button
    • BIOS UEFI AMI Aptio settings (automatic power-on support)
    • There is a heatsink and fan for cooling the CPU.
  • Feeding:
    • 12V DC / 3A + DC jack or via 2-pin header
    • Poe 6 pins + 4 pins
  • Size 115×75 m

Where to buy?

If you are interested in this Youyeetoo X1 SBC, please enter. Get it on AmazonThere is both a version with 8 GB of RAM and a version with 16 GB of RAM, depending on your preferences: